Fresh Juice Filling Machine for Plastic Bottle

Heavy Wall Adhesive Lined Heat Shrinkable Tube
The wall thickness of Heavy wall heat shrinkable tubing was much thicker than Middle wall heat shrink tube. So it has high voltage insulated property. It can be used for 10kv insulation. And also this tube provides maximum reliability for insulation and protecting cable joints and terminations.
Features
Withstands severe mechanical requirements.
Rated for10kv ,90℃ continuous use.
Optional thermoplastic adhesive liner for complete environmental protection and insulation.
Continuous Operation Temperature:-45 ºċ to 125ºċ.
Shrink Temperature:125ºċ.
Size | As Supplied | After Recovery | Standard | |||
mm | Internal Diameter(mm) | Internal Diameter | Out layer Wall Thickness | Adhesive Layer Wall Thickness | Total Wall Thickness | |
9/3 | ≥9 | ≤3 | 2.0±0.20 | 0.35±0.1 | 2.30±0.25 | 1.22 |
13/4 | ≥16 | ≤4 | 2.4±0.20 | 0.35±0.1 | 2.75±0.25 | 1.22 |
20/6 | ≥19.1 | ≤6 | 2.5±0.20 | 0.40±0.1 | 2.90±0.25 | 1.22 |
28/9 | ≥25 | ≤9 | 2.5±0.20 | 0.40±0.1 | 2.90±0.25 | 1.22 |
33/10.2 | ≥33 | ≤10.2 | 3.2±0.25 | 0.40±0.1 | 3.60±0.25 | 1.22 |
238.1/12 | ≥38.1 | ≤12 | 3.4±0.20 | 0.60±0.15 | 4.00±030 | 1.22 |
43.2/12.7 | ≥43.2 | ≤12 | 4.3±0.20 | 0.70±0.35 | 5.00±035 | 1.22 |
51/16 | ≥51 | ≤16 | 4.3±0.20 | 0.70±0.35 | 5.00±035 | 1.22 |
70/21 | ≥70 | ≤21 | 4.3±0.20 | 0.70±0.35 | 5.00±035 | 1.22 |
85/25 | ≥85 | ≤25 | 4.3±0.20 | 0.70±0.35 | 5.00±035 | 1.22 |
105/30 | ≥105 | ≤30 | 4.3±0.20 | 0.80±0.35 | 5.10±035 | 1.22 |
120/39 | ≥120 | ≤39 | 4.3±0.20 | 0.50±0.35 | 5.10±035 | 1.22 |
140/42 | ≥140 | ≤42 | 4.3±0.20 | 0.60±0.35 | 5.10±035 | 1.22 |
Technical Date:
Property | Test Method | Standard |
Tensile Strength(Mpa) | ASTM D2671 | ≥10.4 |
Elongation(%) | ASTM D2671 | ≥300 |
Density(g/cm3) | ASTM D792 | 1.2 |
Longitudinal change(%) | UL 224 | ≤±10 |
Elongation after aging(%) | UL224 158?? X168hrs | ≥200 |
Heat shock | UL224 225?? X4hrs | No cracking |
Dielectric strength(kv/mm) | IEC 243 | ≥20 |
Volume resistivity(Ω.cm) | IEC 93 | ≥1014 |
Water absorption(%) | ASTM-D570 | ≤0.5 |
Hot Melting Adhesive Property
Property | Test Method | Stantard |
Water absorption | ASTM D570 | ≤0.2% |
Softening point | ASTM E28 | 95℃ |
Peel strength(PE) | ASTM D1000 | 120N/25mm |
Peel strength(AL) | ASTM D1000 | 80N/25mm |
BAKAI, which is well-known as one of the professional heavy wall polyolefin heat shrink tube manufacturers and suppliers, now brings you high quality heavy wall polyolefin heat shrink tube from its professional factory. We now have heavy wall polyolefin heat shrink tube for sale, you are warmly welcomed to buy quality products with us.
You Might Also Like
Food Grade Silicone Hose, Silicone Tube, Silicone Tu...
Free Sample Replace Raychem Single Wall Heatshrink S...
Industrial PVC Steel Wire Reinforced Vacuum Water Ho...
3 Inches Length Silicone 3 Ply Convoluted Charge Air...
4: 1 Dual Wall Crosslinked Polyolefin Heat Shrink Tu...
Silicon Rubber Cold Shrink Tubing for Waterproof and...